SBA 7(a) Loans: What they are, Requirements, Apply

News Room

Because small businesses are so critical to the country’s success, the federal government launched the Small Business Administration (SBA) to help foster American small businesses.

The most popular way the SBA furthers its mission is through SBA 7(a) loans—if your business qualifies, you can get funding backed by the government that can help take your enterprise to the next level.

What is an SBA 7(a) loan?      

An SBA 7(a) loan is a form of financing that is partially guaranteed by the SBA. These loans are named after Article 7(a) of the Small Business Act of 1953, which launched the SBA and tasked the agency with supporting American small businesses through lending.

SBA 7(a) loans are popular for financing real estate purchases, working capital, and purchasing furniture and supplies. They’re also commonly sought for refinancing existing business debt.

Remember, the SBA is a federal agency, not a bank. Therefore, SBA 7(a) loans are serviced by a private financier and are partially backed by the SBA (that is, the government). Because the SBA backs the loan, this financing has certain requirements that all successful applicants must meet. 

SBA 7(a) loans are the most popular type of loans offered by the SBA, so sometimes people just call them “SBA loans.” However, there are actually several types of SBA 7(a) loans, and the SBA also offers other lending options.

What can an SBA 7(a) loan be used for?        

Proceeds from a 7(a) loan may be used for:

  • Working capital
  • Equipment purchases
  • Real estate
  • New-building construction
  • Renovation or expansion
  • Starting a new business
  • Purchasing an existing business

Loan proceeds may not be used to:

  • Pay off an existing business loan
  • Buy out a partner
  • Pay delinquent state or federal withholding taxes
  • Anything else that wouldn’t be considered a sound business purpose as determined by the SBA

Types of SBA 7(a) loans

The SBA has a suite of different financing products under its 7(a) distinction, and each one is meant to fill a different need in the small business ecosystem.

When considering your options, think about how large of a loan your business needs, your intended use of the funds, and how quickly you need the money.

SBA loans require a fair amount of information and paperwork, so researching 7(a) loan types will save you time later.

Type Maximum loan amount Maximum guarantee Terms Collateral  Purpose
Standard 7(a) $5 million 75% Up to 10 years (working capital)
Up to 25 years (real estate)
Required Working capital
Equipment
Real estate
7(a) Small $500,000 85% up to $150,000
75% for loans greater than $150,000
Up to 10 years (working capital)
Up to 25 years (real estate)
<$50,000: No requirement
>$50,000: Lender follows its policy for similar loans
Working capital
Equipment
Real estate
SBA Express $500,000 50% Up to 10 years (working capital)
Up to 25 years (real estate)

Up to 10 years (revolving line of credit)

<$50,000: No requirement
>$50,000: Lender follows its policy for similar loans
Working capital
Equipment
Real estate
Export Express $500,000 <$350,000: 90%
>$350,000: 75%
Up to 7 years (lines of credit)
Up to 10 years (working capital, equipment, and inventory purchases)
Up to 25 years (real estate)
<$50,000: No requirement
>$50,000: Lender follows its policy for similar loans
Entering or expanding an export business
Export Working Capital $5 million 90% Up to 10 years (working capital)
Up to 25 years (real estate)
Up to 3 years (line of credit)
Required Working capital to support export sales
International trade $5 million 90% Up to 10 years (working capital)
Up to 25 years (real estate)
Required Facilities and equipment used to produce goods or services involved in international trade
CAP Lines $5 million 85% up to $150,000
75% for lines greater than $150,000
10 years
5 years (Builders CAPLine)
Required Cyclical working capital needs

Standard 7(a) loan

As its name suggests, the standard 7(a) loan is the most common and most popular type of 7(a) loan backed by the SBA. The purpose of these loans is to allow small businesses to expand by funding working capital or the purchase of equipment, supplies, and real estate. 

A standard 7(a) loan is available in amounts of $500,000 to $5 million. The maximum SBA guarantee is 85% for loans up to $150,000 and 75% for loans greater than $150,000. The SBA requires lenders to collateralize all standard 7(a) loans. 

For standard 7(a) loans, the SBA makes all the approval decisions, although they will allow qualified financiers the authority to make eligibility decisions. Applicants can expect a decision within five to 10 business days.  

7(a) small loan

The 7(a) small loan is similar in many ways to the standard 7(a) loans, but it’s meant for businesses that need smaller amounts of funding to get off the ground or expand. 

The maximum loan amount is $350,000. Their turnaround time and eligibility decision process are the same as standard 7(a) loans. The SBA guarantees 85% of loans up to $150,000 and 75% of loans over that amount. Collateral is not required for loans under $50,000. The lender follows its collateral policy for loans greater than $50,000.      

Express loan

The SBA express loan is built for speed—sometimes, entrepreneurs need funding ASAP.

The maximum amount for an express loan is $500,000, and an application will be responded to in 36 hours or less. These loans are 50% guaranteed by the SBA. The lender makes all eligibility, collateral, and credit decisions. 

Export express loan

The export express loan was specifically created as a streamlined option for businesses in the export industry or those looking to develop an export operation.

The loans, with a maximum amount of $500,000, have a breakneck turnaround time of just 24 hours or less. Lenders make all eligibility and collateral decisions. The SBA guarantee is 90% for loans of $350,000 or less and 75% for larger loans. This funding can also take the form of a revolving line of credit that can last up to seven years.    

Export working capital loan

Also tailored for exporters, the export working capital loan is meant to fund working capital for businesses that generate export sales.

These loans can range up to $5 million, and the SBA guarantee is 90%. Eligibility decisions are made by the SBA or qualified lenders. Unlike other 7(a) loans, there is no maximum interest limit imposed by the SBA for export working capital loans. The decision turnaround time is five to 10 business days. 

Collateral is required, usually in the form of export inventory and personal guarantees from a business’ owners. This loan can also take the form of a revolving line of credit for three years or less.

International trade loan

International trade loans are SBA 7(a) loans aimed at businesses that want to grow their export side or need to modernize their operation to handle foreign competition.

The maximum loan amount is $5 million, and the eligibility decisions, turnaround time, and SBA guarantee are the same as for export working capital loans. For international trade loans, the loan maturity is set at 10 years for permanent working capital.

For equipment and machinery, these loans mature up to 10 years or at the useful life of the equipment (not to surpass 15 years). For real estate, these loans mature at 25 years.    

CAPLines of credit

CAPLines of credit are a form of a standard SBA 7(a) loan that works as a line of credit instead of a loan.

Remember, a business line of credit is a form of financing that allows businesses to access money as expenses arise, similar to a credit card. With a business loan, on the other hand, a full amount is disbursed upon approval, and repayments are made based on the approved amount.

The loan maximums, terms, and decision process of CAPLines of credit are the same as for standard 7(a) loans. The SBA offers four types of CAPLines:

  • Seasonal CAPLine – A line of credit meant for businesses that operate on a seasonal basis
  • Contract CAPLine – A line of credit aimed at financing businesses that work on a contract basis
  • Builders CAPLine – A line of credit for small general contractors or builders that construct or renovate residential or commercial buildings
  • Working CAPLine – A line of credit for businesses that are unable to meet credit standards for other long-term financing, typically businesses that provide credit to other businesses, and in which repayment is based on assets

Builders CAPLines of credit can last up to five years. All others can last up to 10 years. Owners of applicant businesses are required to guarantee the lines of credit.

Eligibility requirements for SBA 7(a) loans

The SBA notes that almost all American businesses are eligible for SBA 7(a) loans, but there are exceptions, like if your organization is structured as a nonprofit or is a recreational facility or club that selectively denies membership to members of a particular minority group.

Also, if any of the principals of the business is currently incarcerated, on parole, or on probation, your application will not be accepted. 

To be eligible for a SBA 7(a) loan, your business must:

  • Operate for profit
  • Operate—or propose to operate—in the United States
  • Have owner equity to invest
  • Be unable to secure financing through other non-government means, excluding personal funds as of August 1, 2023
  • Meet the SBA’s definition of a small business 
  • Demonstrate ability to repay the loan through a combination of credit score, earnings, and equity or collateral

SBA 7(a) loan terms

SBA loans are meant to support long-term small business growth.

Loan maturity terms, as a result, are based on the ability to repay, the purpose of the loan, and the life of assets financed by the loan. Loan maturity refers to how long it takes for a borrower to repay the loan. At the end of your loan maturity term, you’ll make the final repayment. 

The maximum maturities for SBA loans are as follows.

  • The maximum maturity for real estate is 25 years.
  • The maximum maturity for equipment is 10 years.
  • The maximum maturity for working capital or inventory is 10 years.

SBA 7(a) loans used to buy fixed assets, like real estate or equipment, carry a maturity limited to the economic life of those assets, not to exceed 25 years. Fixed assets, which also include commercial property or furniture, are assets meant for long-term use that cannot be quickly converted to cash.

SBA 7(a) loan rates

With SBA 7(a) loans, the interest rate is negotiated between the borrower and the lender. In most cases, the lender will determine a rate based on an applicant’s creditworthiness, and the applicant either accepts or rejects that rate.

You might be able to further negotiate a rate by talking with a lender. Importantly, the SBA sets maximum interest rates for all 7(a) loans, with the exception of export working capital loans.

This maximum interest rate is based on the prime interest rate or an optional peg rate and can be fixed or variable. The current Prime rate as of August 2, 2024, is 8.5%.

SBA 7(a) loan amount Maximum fixed rate
$25,000 or less Base rate + 8%
$25,000 to $50,000 Base rate + 7%
$50,000 to $250,000 Base rate + 6% 
$250,000+ Base rate + 5% 
SBA 7(a) amount Maximum variable rate
Up to $50,000 Prime + 6.5%
$50,000-$250,000 Prime + 6.0%
$250,000-$350,000 Prime + 4.5%
Greater than $350,000 Prime + 3.0%

SBA 7(a) fees                            

Along with interest rates, you should expect to pay a guaranty fee to the lender for SBA 7(a) loans. This fee will be based on the size of the loan and the type of 7(a) loan you apply for. Generally, guarantee fees range between 0% and 3.5%. 

Here is how the SBA breaks down what fees lenders can charge borrowers:

Gross loan size 0% of the guaranteed portion Maturity terms
Up to $1 million 0% of the guaranteed portion Maturities of over 12 months
$1 million+ 3.5% of guaranteed portion up to $1,000,000 PLUS 3.75% of the guaranteed portion over $1,000,000 Maturities of over 12 months
Up to $1 million 0% of the guaranteed portion Maturity of 12 months or less
$1 million+ .25% of the guaranteed portion Maturity of 12 months or less
SBA Express Loans to qualified Veterans & Spouses up to $350,000 $0 Maturities of over 12 months
EWCP loan up to $1 million .25% of the guarantee portion Any
EWCP loan greater than $1 million .525% of the guaranteed portion Maturities of 12 months or less
EWCP loan greater than $1 million .525% of guaranteed portion Maturities of 13-24 months
EWCP loan greater than $1 million .8% of the guarantee portion. Maturities of 25-36 months

Notably, the SBA expressly prohibits lenders from charging most other fees, including processing, origination, application, and brokerage fees.

How to Apply for an SBA 7(a) Loan                     

While hundreds of different lenders offer 7(a) loans, the process is fairly standardized by the SBA.

Step 1: Research options and gather documents.

Consider your business needs and determine which type of 7(a) loan or line of credit works for your company. To estimate your monthly payment, visit our SBA loan calculator. Once you know what type of loan you want, you can compare lenders.

Below is a list of the documents you should prepare for your SBA loan application when applying through Lendio for an SBA 7(a) small loan.

  • Six months of business bank statements (connect account or manually upload images)
  • Copy of your driver’s license or state ID
  • Voided check from your business account
  • Month-to-date transactions
  • Two years of business and personal tax returns (for all business principals with 20% or more ownership)
  • Debt schedule
  • Year-to-date profit and loss statement
  • Year-to-date balance sheet

Step 2: Submit the application with a lender.

Once you know what type of SBA 7(a) loan works for your business, compare qualified lenders. You can do this online using the SBA website or with a financing platform like Lendio.

You can easily compare options and get specifics on what exactly you need for your application packet. Once you know the packet requirements and terms of the loan you want, submit your application to a lender.

Step 3: Close on loan and receive funds.

Depending on the type of 7(a) loan, the turnaround times for decisions can range widely. You might receive a decision on an application for an express 7(a) loan in just a few days, but you might have to wait several weeks to find out about approval for your standard 7(a) loan application. Patience is always a virtue when dealing with the federal government.

Ready to apply?

Apply for an SBA loan with Lendio’s quick application. We’ll connect you with the right lender for your situation, and can, on average, get you funded with a 7(a) small loan in less than 30 days.

Quickly compare loan offers from multiple lenders.

Applying is free and won’t impact your credit.

Read the full article here

Share This Article
Leave a comment

Leave a Reply

Your email address will not be published. Required fields are marked *